HP Color Copier manual Changing Default Settings, ELC Enhance Light Colors, 8Copying

ELC (Enhance Light Colors)

ELC enhances light-colored backgrounds in documents and improves the appearance of very pale colors. It is turned off by default and should usually be left off. (ELC is automatically turned on when you select Photo Mode.) However, turn ELC on if pale colors are copying as white.

To turn ELC on or off, do the following:

1Press Menu until ELC appears.

2Press the minus (–)or plus (+) button to switch between off ❍ and on ●.

3Press Select/Resume to confirm your selection.

Changing Default Settings

This section explains how to change the default front-panel settings.

NOTE	To change the default language, see “Changing the Front-Panel Language” in
	Chapter 2.

Creating Your Own Default Settings

If you consistently use settings on the front panel other than the default settings, you can make those your new default settings. You can change most settings. To create new default settings:

1Set all options the way you want them.

2Press Menu until Set Defaults appears.

3Press Select/Resume to confirm your selection.

NOTE	Current settings are indicated by a solid circle ●. Default settings have no special
	indicator.

Restoring the Factory Default Settings

You can return all the front-panel settings to their factory default settings. To do so:

1Press the Menu button until Factory Defaults appears.

2Press Select/Resume to confirm your selection.

4-8Copying