HP CP1020 manual Connect to a network network models only, Supported network protocols

Models: CP1020

1 174
Download 174 pages 59.86 Kb
Page 38
Image 38

Connect to a network (network models only)

The product can connect to wired or wireless networks.

NOTE: You cannot connect to a wired and wireless network simultaneously. Wired connections take precedence.

Supported network protocols

To connect a networking-equipped product to a network, you need a network that uses one of the following protocols.

TCP/IP (IPv4 or IPv6)

Port 9100

LPR

DHCP

AutoIP

SNMP

Bonjour

SLP

WSD

NBNS

Install the product on a wired network

Configure the IP address

1.Connect the network cable to the product and to the network.

2.Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product.

26 Chapter 4 Connect the product

ENWW

Page 38
Image 38
HP CP1020 Connect to a network network models only, Supported network protocols, Install the product on a wired network