Print jobs using the photo tray do not print
Solution The photo tray may not be properly engaged in the printer. Lift the output tray up and verify that the photo tray is pushed in until it stops and then lower the output tray. Press Resume.
The printout is rippled or curled
Solution The project you are printing uses a larger amount of ink than normal. Print the project from a computer, and use the printer software to lower the ink saturation level. See the onscreen HP Photosmart help for more information.
The document printed at an angle or is off-center
Solution
●The paper may not be loaded correctly. Reload the paper, making sure it is correctly oriented in the main tray and that the
●If you are using a
●The printer may need to be aligned. For more information, see Aligning the printer.
Colors are not printing satisfactorily
Solution
●The printer may need to be aligned. For more information, see Aligning the printer.
●The print head may need to be cleaned. For more information, see Care and maintenance.
No page came out of the printer or the paper jammed while printing
Solution
●The printer may need attention. If the printer is connected to a computer, check the computer screen for instructions.
●The power may be off or there may be a loose connection. Make sure the power is on and the power cord is securely connected.
●You may not have any paper in the main tray or photo tray. Check that the paper is loaded correctly. For
●If the paper jammed while printing, try the following:
–Turn off the printer, then unplug it from the power source. Clear the printer of any paper obstructing the paper path. Remove the rear access door. Gently remove the jammed paper from the printer, then replace the rear access door. If all jammed paper cannot be removed from the rear area of
HP Photosmart D6100 series User Guide | 33 |
