Solving Media Card Reader Problems
Table 2-5 Solving Media Card Reader Problems
Media card will not work in a digital camera after formatting it in Microsoft Windows XP.
Cause | Solution |
|
|
By default, Windows XP will format any media card with a capacity greater than 32MB with the FAT32 format. Most digital cameras use the FAT (FAT16 & FAT12) format and can not operate with a FAT32 formatted card.
Either format the media card in the digital camera or select FAT file system to format the media card in a computer with Windows XP.
A
Cause | Solution |
|
|
Media card is locked. Locking the media card is a safety feature that prevents writing to and deleting from an SD/Memory Stick/ PRO card.
If using an SD card, make sure that the lock tab located on the right of the SD card is not in the locked position. If using a Memory Stick/PRO card, make sure that the lock tab located on the bottom of the Memory Stick/PRO card is not in the locked position.
Can not write to the media card.
Cause | Solution |
|
|
The media card is a
Check the manufacturer’s documentation included with your card to see if it is writable.
Unable to access data on the media card after inserting it into a slot.
Cause | Solution |
|
|
The media card is not inserted properly, is inserted in the wrong slot, or is not supported.
Ensure that the card is inserted properly with the gold contact on the correct side. The green LED will light if inserted properly.
Do not know how to remove a media card correctly.
Cause | Solution |
|
|
The computer’s software is used to safely eject the card.
Open My Computer,
NOTE Never remove the card when the green LED is flashing.
20 Chapter 2 Troubleshooting Without Diagnostics | ENWW |