Table A-1 Numeric Codes and Text Messages (continued)
Control panel message | Description | Recommended action |
Chassis, rear chassis, or front chassis fan is 1. | Reseat chassis, rear chassis, or front |
not connected or may have malfunctioned. | chassis fan. |
|
| 2. | Reseat fan cable. |
|
| 3. | Replace chassis, rear chassis, or front |
|
|
| chassis fan. |
|
|
|
|
CPU or chassis fan is not connected or may | 1. | Reseat CPU or chassis fan. | |
| have malfunctioned. | 2. | Reseat fan cable. |
|
| ||
|
| 3. | Replace CPU or chassis fan. |
|
|
|
|
Diskette controller circuitry or floppy drive | 1. | Run Computer Setup. | |
| circuitry incorrect. | 2. | Check and/or replace cables. |
|
| ||
|
| 3. | Clear CMOS. (See Appendix B, |
|
|
| Password Security and Resetting |
|
|
| CMOS.) |
|
| 4. | Replace diskette drive. |
|
| 5. | Replace the system board. |
|
|
|
|
Mismatch in drive type. | 1. | Run Computer Setup. | |
|
| 2. | Disconnect any other diskette controller |
|
|
| devices (tape drives). |
|
| 3. | Clear CMOS. (See Appendix B, |
|
|
| Password Security and Resetting |
|
|
| CMOS.) |
|
|
| |
External tape drive not connected. | Reinstall tape drive or press F1 and allow | ||
|
| system to reconfigure without the drive. | |
|
|
| |
Configuration error. | Run Computer Setup and check the | ||
Assignment Conflict |
| configuration in Advanced > Onboard | |
|
| Devices. | |
|
|
| |
Integrated graphics controller display cache | Replace system board if minimal graphics | ||
| is not working properly and will be disabled. | degrading is an issue. | |
|
|
| |
Computer cover was removed since last | No action required. | ||
Since Last System Startup | system startup. |
|
|
|
|
| |
Front audio harness has been detached or | Reconnect or replace front audio harness. | ||
| unseated from motherboard. |
|
|
|
|
| |
Front USB harness has been detached or | Reconnect or replace front USB harness. | ||
| unseated from motherboard. |
|
|
|
|
| |
There is an incompatibility/problem with this | Try rebooting the system. If the error | ||
initialize | device and the system or PCI Express Link | reoccurs, the device may not work with this | |
| could not be retrained to an x1. | system | |
|
|
|
|
ENWW | POST Numeric Codes and Text Messages 53 |