Product Features
10.Remove the bezel subpanel as described in the “Removing Bezel Blanks” section.
ÄCAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel.
11.Reposition the bezel blanks within the subpanel in the proper orientation for the minitower configuration.
12.Reposition the subpanel (rotate it 90°) with the logo at the bottom, then snap it back into the bezel.
Changing from a Desktop to a Minitower Configuration
13.Replace the front bezel and computer access panel.
14.Reconnect the external equipment.
15.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.
www.hp.com | Hardware Reference Guide |