HP dc7600 tower manual Desktop and Minitower Drive Positions

Hardware Upgrades

15.Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for instructions about using Computer Setup.

Drive Positions

Desktop and Minitower Drive Positions

1Three 5.25-inch, half-height bays for optional drives (an optional hard drive mounting bracket for these drive bays is available from HP)

2One standard 3.5-inch, one-third height bay (1.44-MB diskette drive shown)*

3Two internal 3.5-inch, one-third height bays for hard drives

*Depending on the computer configuration, you may have a bezel blank in this position. If you do not have a drive in this slot, you may choose to install a 3.5-inch device (such as a diskette drive, hard drive, or Zip drive) later on.

To verify the type and size of the storage devices installed in the computer, run Computer Setup. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for more information.

Hardware Reference Guide www.hp.com 2–21