Hardware Upgrades
5. Connect the power cable 1 and data cable 2 to the hard drive.
Connecting the Power Cable and Data Cable to a SATA Hard Drive
6.Connect the opposite end of the data cable to the appropriate system board connector.
✎If your system has only one SATA hard drive, you must connect the hard drive to the connector labeled P60 SATA 0 first to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the system board connector labeled P61 SATA 1.
7.Replace the computer access panel.
8.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.
9.Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for instructions about using Computer Setup.
Hardware Reference Guide | www.hp.com |
