HP Mini dc7608 tower manual 217

		POST Error Messages
POST Error Messages (Continued)
Screen Message	Probable Cause	Recommended Action
207-ECC Corrected	Memory module is	If additional memory was recently
Single Bit Errors in	experiencing correctable	added, remove it to see if the problem
DIMM slot(s)	errors.	remains.
		If memory module was not recently
		installed and frequency of error message
		increases, consider replacing the
		module.
		Check product documentation for
		memory support information.
213-Incompatible	A memory module in	Verify proper memory module type.
memory Module in	memory socket identified	Try another memory socket.
memory Socket(s)	in the error message is	Replace memory with a module
X,X, X	missing critical SPD
		conforming to the SPD standard.
	information, or is
	incompatible with the
	chipset.
214-DIMM	Populated DIMM	Rearrange the DIMMS so that each
Configuration Warning	configuration is not	channel has the same amount of
	optimized.	memory.
216-Memory Size	Recently added memory	If additional memory was recently
Exceeds Maximum	module(s) exceeds the	added, remove it to see if the problem
Supported	supported memory	remains.
	amount for the system.	Check product documentation for
		memory support information.

219-ECC Memory Module Detected. ECC Modules not supported on this platform

Recently added memory	If additional memory was recently
module(s) support ECC	added, remove it to see if the problem
memory error correction.	remains.
	Check product documentation for
	memory support information.

301-Keyboard Error	Keyboard failure.	Reconnect keyboard with computer
		turned off.
		Check connector for bent or missing
		pins.
		Ensure that none of the keys are
		depressed.
		Replace keyboard.
303-Keyboard	I/O board keyboard	Reconnect keyboard with computer
Controller Error	controller.	turned off.
		Replace the system board.

Service Reference Guide, dc7600 390742-002 C–3