Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
6.Slide the pivoting bar to the right 1, then lift the left end 2 to remove it from the chassis. To replace the bar, slide it into the socket on the right 1, lower it into position 3, and slide it to the left 4 to secure it in place.
7.With the bar in a slightly rotated position, install the latches through the openings in the back of the chassis and press them firmly in place on the rotating bar.
✎The green latches are marked “R” and “L” for your convenience.
Service Reference Guide, dc7600 |