Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis

8.20.1Type 1 Battery Holder

1.Lift the battery out of its holder.

2.Slide the replacement battery into position, positive side up.

3.The battery holder automatically secures the battery in the proper position.

4.After the battery has been replaced, reverse the disassembly procedure.

5.Plug in the computer and turn on power to the computer.

6.Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide.

 

Service Reference Guide, dc7700

433612-001

8–27