HP dc7700 manual 211

			POST Error Messages
POST Error Messages (Continued)
Screen Message	Probable Cause		Recommended Action
2201-MEBx Module did	Memory error during	1.	Reboot the computer.
not checksum correctly	POST execution of the
		2.	Unplug the power cord, re-seat the
	Management Engine
	(ME) BIOS Extensions		memory modules, and reboot the
	option ROM		computer.
		3.	If the memory configuration was
			recently changed, unplug the power
			cord, restore the original memory
			configuration, and reboot the
			computer.
		4.	If the error persists, replace the
			system board.
2202-PMM	Memory error during	1.	Reboot the computer.
Deallocation Error	POST execution of the
		2.	Unplug the power cord, re-seat the
during MEBx cleanup	Management Engine
	(ME) BIOS Extensions		memory modules, and reboot the
	option ROM		computer.
		3.	If the memory configuration was
			recently changed, unplug the power
			cord, restore the original memory
			configuration, and reboot the
			computer.
		4.	If the error persists, replace the
			system board.
2203-Setup error	MEBx selection or exit	1.	Reboot the computer.
during MEBx execution	resulted in a setup failure.
		2.	Unplug the power cord, re-seat the
			memory modules, and reboot the
			computer.
		3.	If the memory configuration was
			recently changed, unplug the power
			cord, restore the original memory
			configuration, and reboot the
			computer.
		4.	If the error persists, replace the
			system board.
2204-Inventory error	BIOS information passed	1.	Reboot the computer.
during MEBx execution	to the MEBx resulted in a
		2.	If the error persists, update to the
	failure.
			latest BIOS version.
		3.	If the error still persists, replace the
			system board.

Service Reference Guide, dc7700 433612-001 C–7