Resetting the Computer | HP dv2000 dv2000 instruction

❏Docking (select models only)

❏ExpressCard

❏External monitor

❏IEEE 1394 digital (select models only)

❏Memory Reader Slot (select models only)

❏Power

❏RJ-11 (modem)

❏RJ-45 (network)

❏S-Video-out (select models only)

❏Universal Serial Bus (USB) v. 2.0

1.2Resetting the Computer

If the computer you are servicing has an unknown password, follow these steps to clear the password. These steps also clear CMOS:

1.Prepare the computer for disassembly (refer to Section 5.3, “Preparing the Computer for Disassembly,” for more information).

2.Remove the real-time clock (RTC) battery (refer to Section 5.5, “RTC Battery,” for more information).

3.Wait approximately 5 minutes.

4.Replace the RTC battery and reassemble the computer.

5.Connect AC power to the computer. Do not reinsert any batteries at this time.

6.Turn on the computer.

All passwords and all CMOS settings have been cleared.

1–4	Maintenance and Service Guide