HP dv2000 dv2000 manual Reverse the above procedure to install the switch cover

Removal and Replacement Procedures

✎The power button board is available using spare part number 417084-001.

13.If it is necessary to replace the power button board, remove the two Phillips PM2.0×3.0 screws 1 that secure the board to the switch cover, and then remove the power button board 2.

14.If it is necessary to replace the LED board cable, release the ZIF connector 3 to which the cable is connected and disconnect the cable 4 from the LED board.

Removing the Power Button Board and LED Board Cable

Reverse the above procedure to install the switch cover.

Maintenance and Service Guide 5–31