![](/images/new-backgrounds/1307975/307975141x1.webp)
Display assembly
Description | Spare part number |
|
|
microphone module, webcam/microphone module cable, 2 microphones, and 3 wireless antenna |
|
transceivers and cables) |
|
|
|
(includes webcam/microphone module, webcam/microphone module cable, 2 microphones, and 3 |
|
wireless antenna transceivers and cables) |
|
|
|
(includes webcam/microphone module, webcam/microphone module cable, 2 microphones, and 3 |
|
wireless antenna transceivers and cables) |
|
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 43).
5.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 45).
6.Remove the following components:
a.Keyboard (see Keyboard on page 54)
b.Switch cover (see Switch cover on page 57)
c.Top cover (see Top cover on page 58)
Remove the display assembly:
1.Close the computer.
2.Turn the computer upside down, with the rear panel toward you.
3.Remove the two Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
Component replacement procedures 63