11.Remove the display assembly (2).

12.If it is necessary to replace any of the display assembly internal components, remove the two rubber screw covers (1) on the display bezel bottom edge. The rubber screw covers are included in the Display Rubber Kit, spare part number 468802-001 for dv3000 models, 500966-001 for dv3500 models with an LCD display, and 502460-001 for dv3500 models with an LED display.

13.Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel to the display assembly.

14.Flex the inside edges of the left and right sides (1) and the top and bottom edges (2) of the display bezel until the bezel disengages from the display enclosure.

Component replacement procedures 65

Page 73
Image 73
HP DV3000 manual