7.If you are installing an optical drive, install four M3 metric guide screws (not provided) in the lower holes on each side of the drive.

NOTE: When replacing an optical drive, transfer the four M3 metric guide screws from the old drive to the new one.

CAUTION: Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

8.Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place.

34 Chapter 2 Tower (TWR) hardware upgrades

ENWW

Page 41 Page 43
Page 42
Image 42
HP E1Z94UT E1Z94UT#ABA manual Enww
Page 41 Page 43
Top Page Image Contents