Removing a bezel blank
On some models, there is a bezel blank covering the slim optical drive bay that needs to be removed before installing a slim optical drive. To remove a bezel blank:
1.Remove the access panel and front bezel.
2.To remove the bezel blank, press inward on the six retaining tabs (1) and pull the blank off the front bezel (2).
NOTE: After removing the slim optical drive bezel blank and installing a slim optical drive, you can install an optional bezel trim piece (available from HP) that surrounds the front of the slim optical drive.
ENWW | Removing a bezel blank 103 |
