8.Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place.
9.If installing a USB 3.0 media card reader, connect the USB cable from the media card reader to the USB 3.0 connector on the system board labeled MEDIA3.0.
NOTE: Refer to System board connections on page 64 for an illustration of the system board drive connectors.
10.Replace the front bezel.
11.Replace the computer access panel.
12.Reconnect the power cord and any external devices, then turn on the computer.
13.Lock any security devices that were disengaged when the access panel was removed.
ENWW | Installing and removing drives 39 |
