11.If installing a USB 3.0 media card reader, connect the USB cable from the media card reader to the USB 3.0 connector on the system board labeled MEDIA3.0.
NOTE: Refer to System board connections on page 64 for an illustration of the system board drive connectors.
12.Rotate the drive cage back down to its normal position.
CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.
13.Replace the front bezel.
14.Replace the computer access panel.
15.If the computer was on a stand, replace the stand.
16.Reconnect the power cord and any external devices, then turn on the computer.
17.Lock any security devices that were disengaged when the access panel was removed.
ENWW | Installing and removing drives 79 |
