2. Turn on the camera
To turn the camera on, slide the lens cover open until it clicks, uncovering the lens. The Power/ Memory light on the back of the camera turns on solid green. The HP logo also displays on the Image Display as the camera powers up.
To turn the camera off, slide the lens cover closed until it clicks, covering the lens.
CAUTION: When sliding the lens cover, keep your fingers clear of the lens. Fingerprints on the lens can impair the quality of the picture. For information about cleaning the lens, see Cleaning the camera on page 117.
3. Choose the language
The first time you turn the camera on, you are prompted to choose a language.
1.Scroll to the language that you want by using the 
buttons on the Controller 
.
2.Press the 
button to select the highlighted language.
TIP: If you need to change the language later, you can do this with the Language setting in the Setup menu. See Chapter 5, Using the Setup Menu.
Getting started | 9 |
