HP embedded web Server 3700, embedded web Server 4650 manual Email Server, Product on

Email Server

Use the Email Server page to configure e-mail settings for outgoing and incoming mail, which allows you to configure product alerts. The following illustration, table, and procedures describe how to use this page.

1

2

3

4

Callout	Area on the page	Information or capability provided by the area
1	EWS tabs and menus	For more information, see “Navigating through the HP Embedded Web
		Server” on page 3.
2	Outgoing Email	Configure outgoing e-mail if you intend to use the Alerts or AutoSend
		features. For more information, see “Using the Alerts page with a
		product” on page 24.
3	Device Email Address	This is the product’s e-mail address that appears in product alerts. This
		is not the e-mail address that you want to use when sending
		commands to the product. See “Sending e-mail commands to the
		product” on page 28.
4	Incoming Email	Configure incoming e-mail if you intend to request information pages
		from the product by using e-mail messages. For more information, see
		“Sending e-mail commands to the product” on page 28.

20 Configuring the Product from the Settings Pages ENWW