Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number 536539-001 for computers with 15-in displays, 536538-001 for computers with 14-in displays. See Cable Kit on page 45 for more Cable Kit spare part number information.

Description

Spare part number

 

 

HP Integrated Bluetooth 2.0 module for use in all countries and regions except Japan and Asia

483113-001

Pacific countries and regions

 

 

 

HP Integrated Bluetooth 2.1 module for use in all countries and regions except Japan and Asia

537921-001

Pacific countries and regions

 

 

 

Before removing the Bluetooth module, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 63).

5.Remove the following components:

a.Switch cover and keyboard (see Switch cover and keyboard on page 64)

b.Top cover (see Top cover on page 90)

c.Palm rest (see Palm rest on page 75)

d.Hard drive (see Hard drive on page 78)

Remove the Bluetooth module:

1.Position the computer right-side up with the front toward you.

2.Disconnect the Bluetooth module cable (1) from the system board.

3.Remove the Bluetooth module cable (2) from the routing path.

102 Chapter 4 Removal and replacement procedures