HP 4411S, FN068UTABA, 4410S manual

Remove the optical drive:

1.Position the computer with the right side toward you.

2.Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.

NOTE: On 15-in models the screw is located in a hole in the top cover. See the first image below.

NOTE: On 14-in models the screw is located directly below the keyboard ZIF connector. See the second image below.

3.Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to the right to release the optical drive from the computer.

70 Chapter 4 Removal and replacement procedures