3.Remove the memory module (2) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot.

Reverse this procedure to install a memory module.

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.

Description

Spare part number

 

 

DVD±RW Double-Layer Drive with LightScribe (includes bezel)

536416-001

 

 

Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer (includes bezel)

536417-001

 

 

DVD-ROM Drive (includes bezel)

536415-001

 

 

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 63).

5.Remove the switch cover and keyboard (see Switch cover and keyboard on page 64).

Component replacement procedures 69