HP g6 C2N47UARABA, G6-2249wm C2N47UARABA manual Optical drive

Optical drive

NOTE: The optical drive spare part kit includes a bezel and bracket.

Description	Spare part number
Blu-ray ROM DVD±R/RW Super Multi Double-Layer Drive	681814-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive	681815-001
Optical drive cable kit	682742-001

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 40).

5.Remove the service door (see Service door on page 41).

Remove the optical drive:

1.Using a small Phillips screwdriver, remove the PM 2.5 x 6.5 screw (1) that secures the optical drive to the computer.

2.Insert a screwdriver or other narrow tool through the release access hole (2) in the bottom of the computer. Push the rear of the optical drive until it is released.

42 Chapter 4 Removal and replacement procedures ENWW