Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cable) | |
|
|
Before removing the speakers, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 40).
5.Remove the service door (see Service door on page 41).
6.Remove the optical drive (see Optical drive on page 42).
7.Remove the hard drive (see Hard drive on page 44).
8.Remove the keyboard (see Keyboard on page 51).
9.Remove the top cover (see Top cover on page 56).
Remove the speakers:
1.There are two clips that hold the left speaker in place (1).
NOTE: A previously removed top cover screw also secures the right speaker in place.
2.Rotate and lift the left speaker from the top cover (2). Release the speaker cable from the clips built into the top cover.
3.Remove one PM 2.5 x 3.5 screw (3) from the right speaker that secures it to the top cover (2). 
NOTE: This screw also secures the power button board to the top cover.
60 | Chapter 4 Removal and replacement procedures | ENWW |