2.Release the wireless antenna cables (2) from the clips and the opening in the base enclosure.

NOTE: It may be necessary to release the USB board ZIF cable to remove the wireless antenna cables.

CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.

3.Remove the four PM 2.5 × 6.5 screws (1) that secure the display assembly to the computer.

4.Remove the display assembly by lifting straight up (2).

ENWW

Component replacement procedures 67

Page 75
Image 75
HP G6-2249wm C2N47UARABA, g6 C2N47UARABA manual Enww