Using System Diagnostics

System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly.

To start System Diagnostics:

1.Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f2.

2.Click the diagnostic test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostics test while it is running, press esc.

92

Chapter 6 Using Setup Utility (BIOS) and System Diagnostics (Ubuntu Linux)

ENWW

Page 100
Image 100
HP G6-2249wm C2N47UARABA, g6 C2N47UARABA manual Using System Diagnostics