6.If it is necessary to replace the webcam/microphone module:

a.Detach and release the webcam/microphone module (1) as far as the webcam/microphone module cable allows. (The webcam/microphone module is attached to the display enclosure with double-sided tape.)

b.Disconnect the webcam/microphone cable (2) from the webcam/microphone module.

c.Remove the webcam/microphone module.

7.If it is necessary to replace the display panel:

a. Remove the six PM 2.5 × 6.0 screws that secure the display panel to the display enclosure.

ENWW

Component replacement procedures 69