5.Insert a straightened paper clip (1) into the release access opening in the bezel.

6.Press the release tab (2) and remove the bezel from the tab side (3).

7.Remove the bezel (4) from the optical drive.

Reverse this procedure to reassemble and install the optical drive.

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive cable, hard drive bumpers, or hard drive bracket and screws.

Description

Spare part number

 

 

Supports the following 9.50 mm, 6.35 cm (2.50 in) SATA hard drives:

 

 

 

1 TB, 5400 rpm

676521-001

 

 

750 GB, 7200 rpm

633252-001

 

 

750 GB, 5400 rpm

634250-001

 

 

640 GB, 5400 rpm

669300-001

 

 

500 GB, 7200 rpm

634925-001

 

 

500 GB, 5400 rpm

669299-001

 

 

320 GB, 5400 rpm

622643-001

 

 

Supports the following 7.00 mm, 6.35 cm (2.50 in) SATA hard drives:

 

 

 

320 GB, 5400 rpm

645193-001

 

 

Hard drive hardware kit (includes hard drive cable, hard drive bumpers, and hard drive bracket and

682745-001

screws)

 

 

 

44

Chapter 4 Removal and replacement procedures

ENWW