Use the HP sp400 Series Configuration Software

General tab

The General tab displays information about the All-in-One, the battery, and the print cartridge. The values on the General tab cannot be edited.

Device

The Device section displays basic information about the device.

•Name: The name of the individual All-in-One device. The name may be changed for identification purposes. For further information, refer to the Communication Protocols manual, which is available at www.hp.com/support/handheldsp400aio.

•Serial Number: The serial number is also printed on the bottom of the All-in-One, beneath the hand mount.

•MAC Address: The Ethernet address of the All-in-One device. The MAC address may be used by the Wi-Fi® access point for MAC address filtering.

•Current IP Address: The current IP address will be displayed whether a static or dynamic IP address is used. “DHCP” will not be displayed if DHCP is in use. “0.0.0.0” is displayed if the device is not connected to a wireless network.

•Current Port: The current network port in use by the All-in-One device. “0” is displayed if the device is not connected to a wireless network. The current port may be changed on the Server tab.

•FW Version: The version of the installed firmware. If the version name begins with “F,” Wi-Fi is being used; if the version name begins with “B,” Bluetooth is being used.

•FPGA FW Version: The build date of the FPGA configuration firmware.

•Imager FW Version: The version of the imager firmware.

•Comm FW Version: The version of the communications module firmware (Wi-Fi or Bluetooth).

10