How do I ….
5 How do I ….
Check the level of ink
See the Print cartridge section of the General tab.
Change when the battery low warning sounds
Make changes in the Battery section of the Timeouts and Limits tab.
Change the volume of audio feedback
Adjust the audio feedback on the User Feedback tab.
Set up the wireless network and configure the server
1.Connect the All-in-One to a computer with a USB cable.
2.Select the Network tab and configure the All-in-One to connect to your 802.11 network. See “Network tab.”
3.Select the Server tab and configure the All-in-One to connect to your application server. See “Server tab.”
4.Turn the All-in-One off and then on again by pressing the green Power button for three seconds and then pressing it again for one second to restart it.
When the All-in-One is restarted, the blue Wireless light will be in fast blink mode. This indicates that the All-in-One is attempting to authenticate on the Wi-Fi network.
When the All-in-One successfully authenticates, the fast blink is replaced by a slow blink. The slow blink indicates that the All-in-One is attempting to communicate with the server application.
When the All-in-One is successfully communicating with the server application, the slow blink changes to a solid blue light.
22
