Use the HP sp400 Series Configuration Software

Server tab

The Server tab allows you to enter the IP address or host names of the file servers used.

Server Information

NOTE: A fully-qualified computer domain name or an IP address in dot notation can be used for

the first three addresses: the Primary Registration Server Address, the Primary Registration Server Port, and the Alternate Registration Server Address.

Do not leave spaces between numbers and dots if dot notation is used.

•Primary Registration Server Address: The address of the primary registration server.

•Primary Registration Server Port: The user datagram protocol (UDP) port number that the server application listens on.

•Alternate Registration Server Address: The address of the registration server that is used if the primary registration server is not available.

•Alternate Registration Server Port: The UDP port number that is used if the primary registration server is not available.

•File Server Address: The primary address of the file server.

•File Server Port: The UDP port that the file server listens on.

•SPP Retry Count: The number of retries that the All-in-One will attempt if an SPP request is unanswered.

•Allow Unconnected Scan check box: This option affects the behavior of the All-in-One when the connection to the server is lost during operation. If the Allow Unconnected Scan check box is selected, after a bar code has been scanned the All-in-One will try to transmit scan data an indefinite number of times until it succeeds. If this option is not selected, the device will not allow a bar code to be scanned when the connection is lost.

16