HP Handheld sp400 User Feedback tab

Use the HP sp400 Series Configuration Software

User Feedback tab

The User Feedback tab allows you to make changes to the audio feedback for selected situations (conditions), such as “Wireless Not Connected,” and “Successful Scan.” Additionally, there are six Server Feedback conditions that can be programmed to emit specific feedback.

To turn off the audio feedback for a particular condition, select a condition from the drop-down box and select the Disable audio check box.

To change the volume of the audio feedback for all conditions (excluding those conditions for which the audio has been disabled), move the Audio Level slider to the preferred level.

Press the Write to Device button to save changes.

Figure 4-1User Feedback tab when Server Feedback 0 – 5 is selected

21

Contents

HP sp400 Series Configuration Software User Guide Page Contents 1 About this document Intended audience Additional HP Handheld All-in-Onedocuments System requirements 2 Overview Overview of the HP sp400 Series Configuration Software 3Download software and connect the All-in-One Download software Connect the All-in-One Page Page 4Use the HP sp400 Series Configuration Software The Software General tab Device Battery Print Cartridge Timeouts & Limits tab Device Timeouts Ink Level Network tab IP Address Wireless Network Type Access Point Density Enable Wireless Security Server tab Server Information Device Information Imager tab Update tab HHP files Installed File Stamps Update Files Understand how the update process works User Feedback tab 5 How do I … Check the level of ink Change when the battery low warning sounds Change the volume of audio feedback Set up the wireless network and configure the server Update firmware through USB 6 Troubleshoot problems General problems Problems updating