HP hw6500 Unlocked manual Removing the Battery

4.Replace the battery cover by aligning the two tabs on the top of the cover 1 with the two latches in the cover compartment and sliding the battery cover on until it clicks into place 2.

NOTE: If the battery is fully discharged, you must connect the

AC Adapter to the HP iPAQ to fully charge it before continuing. It takes up to four hours to fully charge a completely drained battery.

Removing the Battery

CAUTION: Before removing the battery, use iPAQ Backup or ActiveSync to back up data on your HP iPAQ. If you need to clear the memory during the removal process, you will be able to restore the data. To prevent losing information, you can also copy user-installed applications to the iPAQ File Store folder.

To remove the battery from the HP iPAQ:

1.Remove the battery cover. For more information, refer to “Inserting the Battery” described earlier in this chapter.

2.Remove the battery from the compartment by lifting the tab.

Managing the Battery 13–3