HP hw6500 Unlocked manual Answering a Call, Ending a Call, Making a Call from Contacts

Making a Call

1.From the Today screen, tap the iPAQ Wireless button in the Command bar.

2.Tap the Phone icon on the iPAQ Wireless screen.

Alternate: Tap the icon in the Navigation bar >

Turn off flight mode (activates the wireless radio which turns on your phone).

3.Press the green Answer/Send button on the Thumb keyboard or from the Today screen, tap Start > Phone.

4.Tap the number you want to call, and then tap Talk or press the green Answer/Send button from the Thumb keyboard.

NOTE: Press the Blue key to access the numbers on the Thumb Keyboard.

Refer to the following sections for alternate ways to make a call:

•”Making a Call from Contacts”

•”Making a Call Using Speed Dial”

•”Making a Call From Call History”

•”Making a Conference Call”

Answering a Call

When you receive a phone call, the HP iPAQ rings or vibrates and a message appears on the screen, giving you an option to either answer or ignore the incoming call.

•Tap Answer on the Phone keypad or press the green Answer/Send button on the Thumb keyboard to receive

the call.

NOTE: To silence the phone and reject the call, tap Ignore. This may send the caller to your voicemail or send out a busy signal, depending on your service provider.

Ending a Call

When your phone call is finished, tap End on the Phone keypad or press and hold the red End Call button to end the call.

Making a Call from Contacts

•Tap on the Contacts icon located on the Thumb keyboard, tap and hold the contact’s phone number, and then tap Call Work, Call Home, or Call Mobile.

•To make a call from an open contact, tap the number you want to call.

Using the Phone Features 5–10