HP hw6500 Unlocked manual Phone

Phone

For more information on using the Phone, refer to Chapter 5, “Using the Phone Features.”

Problem	Solution
Phone will not turn on.	•	Check to see if your SIM card is inserted in the HP iPAQ.
	• Be sure the battery in your HP iPAQ is charged.
	• If the HP iPAQ is powering on and the phone still does not
		turn on, contact your mobile phone service provider for help.
I am unable to dial out or	•	Check to see if your SIM card is inserted in the HP iPAQ.
receive incoming phone	•	Make sure your wireless connection to your mobile service
calls.
		provider is turned on and your unit displays the appropriate
		signal strength.
	•	Is the signal strength icon	displaying a diminished
		number of vertical bars in th	e icon? If so, you may be in an
		area outside of the phone network.
	• If you still cannot dial out or receive phone calls, contact
		your mobile service provider for help.
Phone cuts off in the	•	Be sure the battery on your HP iPAQ is fully charged.
middle of phone	•	Is the signal strength icon	displaying a diminished
conversations.
		number of vertical bars in the icon? If so, you may be in an

area outside of the phone network.

Phone runs out of memory. HP iPAQ automatically manages the allocation of memory between storage and program memory. When memory is low, try the following:

•Move data to a storage card.

•Move e-mail attachments to a storage card.

•Delete e-mail or files no longer needed.

•In Internet Explorer options, delete all files and clear history.

•Delete old or unnecessary files by tapping Start > Programs > File Explorer. Tap and hold the file, then from the pop-up menu, tap Delete.

•Remove programs no longer used by tapping Start > Settings > System tab > Remove Programs. Tap the program to be removed and then tap Remove.

•Clear program memory by tapping Start > Settings > System tab > Memory > Running Programs tab. Tap the programs to be cleared and then tap Stop.

Troubleshooting 14–7