HP Insight Cluster Management Utility manual Monitoring a cluster with HP Insight CMU

5 Monitoring a cluster with HP Insight CMU

5.1 Installing the HP Insight CMU monitoring client

You must install the HP Insight CMU monitoring client to properly monitor your cluster.

1.Select the compute nodes that need the rpm installation, and right-click to access the contextual menu.

2.Select Update. This displays a submenu.

3.On the submenu, click Install CMU monitoring client.

4.An X Window appears with the status of the installation. A summary of the installation is provided.

5.When the installation is complete, press Enter to close the window.

Figure 30 Monitoring client installation

5.2 Deploying the monitoring client

If you intend to use HP Insight CMU monitoring, you must install it on the golden node before performing a backup.

The expect package is mandatory and must be installed on the compute nodes.

After a golden image node is created, the HP Insight CMU monitoring client can be deployed. Ensure that the required expect package is installed on the golden image node and install the monitoring agent as follows, using the HP Insight CMU GUI client:

1.Enable Administrator mode Options→Administrator Mode.

2.In the left panel tree of the HP Insight CMU GUI client, right-click the node holding the golden image.

3.Click Update.

4.Select Install CMU monitoring client.

The status of the rpm installation appears in an xterm window. A dialog box notifies you when the installation is complete.

NOTE: If you are upgrading from an older version of HP Insight CMU, then you must reinstall the new HP Insight CMU monitoring agents from the HP Insight CMU v7.1 rpm or HP Insight CMU monitoring will not start.

66 Monitoring a cluster with HP Insight CMU