HP Insight Cluster Management Utility manual Start cmuserver, # /etc/init.d/cmuserver start

* it must support locking via flock()	*
* it must be mounted only by one (active) cmu mgt node at a time	*
* it must be NFS exportable (for kickstart/diskless/backup/cloning)	*
*	*
* 2] (at least) one alias IP address:	*
*	*
* this is the address used by the compute nodes to contact the mgt	*
* service, set CMU_CLUSTER_IP into /opt/cmu/etc/cmuserver.conf	*
* this address should follow the active cmu management machine	*
*	*
* [ optionally: a site alias IP address ]	*
*	*
* 3] a third-party HA software:	*
*	*
* this software is responsible for:	*
*	*
* - mounting/unmounting the /opt/cmu-store filesystem	*
* - activating/removing the alias IP address(es)	*

*- using /etc/init.d/cmu startstopstatus ( NOT /opt/cmu/cmuserver)*

**

**********************************************************************

(y/N) y

setting cmu in audit mode

***CMU is currently in 'audit' mode on cmuadmin1

***use: '/etc/init.d/cmu unset_audit' to unset audit mode

cmu_ha: saving local cmu config in:/opt/cmu-store/etc/savedConfig/cmuconf0-XXXX.sav

cmu_ha: nothing to backup from the cmu HA share merging cmuserver.conf files

`reconf.sh' -> `/opt/cmu-store/etc/reconf.sh'

`pre_reconf.sh' -> `/opt/cmu-store/etc/pre_reconf.sh' `reconf-diskless-image.sh' -> `/opt/cmu-store/etc/reconf-diskless-image.sh' `reconf-diskless-snapshot.sh' -> `/opt/cmu-store/etc/reconf-diskless-snapshot.sh'

/opt/cmu/tmp/GUI/config.txt was rewritten

cmu_ha: all existing cmu data has been saved

cmu_ha: if required, restore it with:

/opt/cmu/tools/restoreConfig -f /opt/cmu/etc/savedConfig/<your_cmuconf>

***successfully configured CMU for HA operation

***install CMU similarly on the other management node(s) of the cluster

management node(s) configured so far: cmuadmin1

5.Start cmuserver:

# /etc/init.d/cmuserver start

Because HP Insight CMU is still in audit mode, it is not started but it will detect possible configuration errors. For example:

cmuadmin1# /etc/init.d/cmu start

cmu:core(highavailability) configured (audit mode)

***error : /usr/java/jre1.6.0_31/bin not found

***adjust CMU_JAVA_BIN into /opt/cmu/etc/cmuserver.conf

cmu:core(standard)	failed configuring		(audit mode)
cmu:java	not running	(audit	mode)
cmu:cmustatus	not running	(audit	mode)
cmu:monitoring	not running	(audit	mode)
cmu:web service	not running	(audit	mode)
cmu:nfs server	not running	(audit	mode)
cmu:dhcpd.conf	configured ( subnet 16.16.184.0 netmask 255.255.248.0 { } )
cmu:cmu_ha_postinstall	done (audit	mode)
cmu:/opt/cmu-store	mounted (audit mode)

note: use '/opt/cmu/cmuserver unset_audit' to unset cmu 'audit mode'

6.Correct possible errors and unset audit mode: cmuadmin1# /etc/init.d/cmu unset_audit

2.4 Installing HP Insight CMU with high availability 27