HP Insight Cluster Management Utility manual Configuring HP Insight CMU to start automatically

monitoring

Status of the monitoring daemon that gathers the information reported by the small monitoring agent installed on the compute nodes.

web service

Status of the HP Insight CMU GUI to start from a web browser on a workstation. nfs server

Status of the NFS server. dhcpd.conf

Status of the DHCPD configuration.

NOTE: Because compute nodes are not installed on the cluster at this time, the monitoring agent is not started after the installation. This behavior is normal. The cluster must be configured for monitoring to start.

B.12 Configuring HP Insight CMU to start automatically

IMPORTANT: This installation depends on the operating system installed and might have to be adapted to your specific installation.

NOTE: The /etc/init.d/cmu file is available as a result of the HP Insight CMU rpm installation.

1.Choose one of the following options:

•If your distribution supports chkconfig:

#chkconfig --add cmu

•If your distribution does not support chkconfig, add start and kill links in the rc.d directory:

#ln -s /etc/init.d/cmu /etc/rc.d/rc5.d/S99cmu

#ln -s /etc/init.d/cmu /etc/rc.d/rc5.d/K01cmu

#ln -s /etc/init.d/cmu /etc/rc.d/rc3.d/S99cmu

#ln -s /etc/init.d/cmu /etc/rc.d/rc3.d/K01cmu

2.After system reboot, verify that the /var/log/cmuservice_hostname.log file does not contain errors.

B.13 Verifying the HP Insight CMU state

The cmuserver utility reports the state of the daemons.

/etc/init.d/cmu	status
cmu:java	running (X.X.X.X:YYYY)
cmu:cmustatus	running
cmu:monitoring	not running (*)
cmu:web service	running (port ZZ)
cmu:nfs server	running
cmu:dhcpd.conf	configured ( subnet 10.0.0.0 netmask 255.255.255.0 { } )
cmu:ha	unconfigured

NOTE: If nodes are not installed on the cluster, then the monitoring agent is not started. This behavior is normal. The cluster must be configured for monitoring to start.

B.14 Installing HP Insight CMU on the GUI client workstation

Many HP Insight CMU commands require the client workstation to display xterm windows from the HP Insight CMU management server. On Windows operating systems desktops, X Window emulators such as Reflection, Exceed, or Xming can be used.

IMPORTANT: The Java Runtime Environment version 1.6.0 or higher must be installed on the GUI client workstation.

B.12 Configuring HP Insight CMU to start automatically 135