HP Insight Cluster Management Utility Starting HP Insight CMU, # vi /opt/cmu/etc/cmuserver.conf

1.Edit the /opt/cmu/etc/cmuserver.conf file:

# vi /opt/cmu/etc/cmuserver.conf

2.Search for the CMU_CLUSTER_IP variable.

3.Replace the default value with the IP address of the Ethernet interface used for cloning.

#CMU mgt node IP address from the point of view of the compute nodes

#

#'default' means this is backward compatibility mode (assuming hostname -i #not recommended anymore)

CMU_CLUSTER_IP=X.X.X.X

4.Verify the address.

# /opt/cmu/tools/cmu_mgt_net_info

X.X.X.X

If the hostname is set correctly, the IP address that connects the HP Insight CMU management server to the compute nodes is returned.

B.11 Starting HP Insight CMU

HP Insight CMU provides the cmuserver utility to manage the HP Insight CMU service on the management node.

Start HP Insight CMU.

#/etc/init.d/cmu start

starting cmu service.
cmu:core(standard)	configured (audit mode)
cmu:java	not running (audit mode)
cmu:cmustatus	not running (audit mode)
cmu:monitoring	not running (audit mode)
cmu:web service	not running (audit mode)
cmu:nfs server	running (audit mode)
cmu:dhcpd.conf	configured ( subnet X.X.X.X netmask Y.Y.Y.Y {} )
cmu:high-availability	unconfigured (audit mode)

note: use '/etc/init.d/cmu unset_audit' to unset cmu 'audit mode'

Where X.X.X.X is the subnet IP address, and YYYY is the netmask of the subnet served by the dhcp server.

After the rpm installation is complete, HP Insight CMU is running in audit mode. This is a trial run to verify that prerequisites are fulfilled. To actually run HP Insight CMU:

#/etc/init.d/cmu unset_audit

cmu service needs (re)start

#/etc/init.d/cmu start

cmu:core(standard)	configured
cmu:java	running (*:1099)
cmu:cmustatus	running
cmu:monitoring	not running
cmu:web service	running (port 80)
cmu:nfs server	running
cmu:dhcpd.conf	configured ( subnet 16.16.184.0 netmask 255.255.248.0 { } )
cmu:ha	unconfigured

The output lists all the daemons started by cmuserver. java

The IP address used by the java interface to receive commands from GUI clients and to send status back to them.

cmustatus

Status of the utility checking the state of all the compute nodes.

134 Detailed installation instructions