HP LP2065 20' manual Operating the Monitor

Operating the Monitor

To use the auto-adjustment feature:

1.Allow the monitor to warm up for 20 minutes before adjusting.

2.Press the -/Auto button on the monitor front panel.

❏You can also press the Menu/Select button, then select Auto-Adjustmentfrom the OSD Main Menu. Refer to “Adjusting Monitor Settings” in this chapter.

❏If the result is not satisfactory, continue with the procedure.

3.Insert the CD in your disc drive. The CD menu launches.

4.Select Open Auto-Adjustment Software. The setup test pattern displays.

5.Press the -/Auto button on the monitor front panel to produce a stable, centered image.

6.Press the ESC key or any other key on your keyboard to exit the test pattern.

4–4 User Guide