6.Disconnect the cables from the fan controller.

7.Slide the fan controller on its mounting bracket, and remove the fan controller from the MCS G2 unit.

Replacing the fan controller

1.Align the fan controller with the mounting bracket.

2.Slide the fan controller into the MCS G2 unit.

3.Connect each cable to the appropriate location on the fan controller, according to the labels on the cables.

4.Lower the fan plate into position above the fan controller.

5.Using a T-25 Torx driver, insert four self-tapping screws to secure the fan plate to the MCS G2 unit.

6.Replace the fan unit above the fan controller ("Replacing the fan unit" on page 37).

Removal and replacement procedures 35