Water valve

The water valve is a component of the water group located at the bottom of the MCS G2 unit.

The following tools are required for installation:

•T-25 Torx driver

•Razor blade

•Pliers (included in the replacement kit)

•8-mm socket or wrench

Removing the water valve

1.Disconnect the power ("Disconnecting the power" on page 23).

2.Turn off the water ("Turning off the water" on page 24).

3.Drain the water from the main inlet water hose ("Draining water from the MCS G2 unit" on page 24).

4.Remove the water controller ("Removing the water controller" on page 57).

5.Remove the bottom fan unit ("Removing the bottom fan unit" on page 29).

6.Remove the water group cover.

Removal and replacement procedures 65