HP Mopier 320 manual Storing the printer and print cartridges, Storing the print cartridges

Models: Mopier 320

1 60
Download 60 pages 24.6 Kb
Page 35
Image 35

Chapter 5

6Press OK to begin aligning the print cartridge.

When the printer finishes aligning the cartridge, it prints an alignment page to confirm that the alignment was successful.

The check marks verify that the print cartridge is installed correctly and functioning properly.

If an “x” appears to the left of any of the bars, align the print cartridge again. If the “x” still appears, replace the print cartridge.

Storing the printer and print cartridges

Protect the printer and print cartridges by storing them properly when you are not using them.

Storing the printer

The printer is built to withstand long or short periods of inactivity.

Close the In and Out tray doors when the printer is not in use.

Store the printer indoors out of direct sunlight in a place without temperature extremes.

If the printer and print cartridge have not been used for one month or more, clean the print cartridge before printing. For more information, see Cleaning the print cartridge.

Storing the print cartridges

When you store or transport the printer, always leave the active print cartridge inside the printer. The printer stores the print cartridge in a protective cap during the power- down cycle.

32

HP Photosmart 320 series

Page 35
Image 35
HP Mopier 320 manual Storing the printer and print cartridges, Storing the print cartridges