HP Mopier 320 manual Remove the pink tape Do not touch here, Insert the cartridge

Chapter 2

Insert or replace the print cartridge

Prepare the printer and cartridge

1 Make sure the power is on and you have removed the cardboard from inside the printer.

2 Open the print cartridge access door of the printer.

3 Remove the bright pink tape from the cartridge.

Remove the pink tape

Do not touch here

Insert the cartridge

1 If you are replacing a cartridge, push down and pull outward on the cartridge in the cradle to remove it.

2 Hold the replacement cartridge with the label on top. Slide the cartridge at a slight upward angle into the cradle so the copper-colored contacts go in first. Push the cartridge until it snaps into place.

3 Close the print cartridge access door.

The idle screen of the printer displays an icon showing the approximate ink level for the installed cartridge (100%, 75%, 50%, 25%, and nearly empty). No ink- level icon appears if the cartridge is not a genuine HP cartridge.

16 HP Photosmart 320 series