Setup Menus
AT 386 or Sco Console emulations. The setting determines the graphics mode that will be entered when the host sends graphics commands.
The ReGIS emulation enables you to run applications written for the DEC VT340 terminal in ReGIS mode.
The Tek4014 emulation enables you to run applications written for the Tektronix 4010 and 4014 terminals.
The VT640 emulation enables you to run applications written for the Retrographics VT640 terminal.
The W2119 emulation enables you to run applications written for the Westward 2119 terminal.
VT Terminal ID
Factory default: VT420
This specifies what is reported back to the host in response to a terminal identification request. Either select from the list of IDs or edit the text box and enter a different terminal identity. (Not all features of the specified terminal may be supported.)
National
Factory default: Unselected
This will only be available if the system is configured for a language that supports national replacement character sets.
The setting of this option determines the type of character set used to generate characters. When selected, a character set specific to the selected keyboard nationality is used. When unselected (default) the emulator is in Multinational mode, a character set consisting of two tables of characters is used. This enables characters from any keyboard nationality to be generated.
Tertiary Device Attribute
When the emulator is in VT420 mode (Emulation set to VT500 and Terminal ID set to VT420), this option enables you to specify the tertiary device attribute report that is sent in response to a request from the host.
Answerback String
This option enables you to specify the Answerback string that is sent to the host in response to an ANSI mode enquiry command. The string may be up to 30 characters long.
Answerback Concealed
Factory default: Unselected
Selecting this option will cause the Answerback string specified in the text box above to be locked from change and displayed as asterisks. Note that deselecting this option will cause the Answerback string to be deleted.