Setup Menus

Group Select Character

Factory default: ^D

This specifies a single character address so that the host can simultaneously transmit to all terminals with that address.

Address

Factory default: ^D’

This enables you to specify a two-character group poll address that enables the host to simultaneously poll all terminals with that address.

Downstream Terminal Port

Factory default: None

This specifies the port used to send transmissions to other terminals.

Beep on NAK

Factory default: Selected

Specifies whether an audible warning is emitted when the Unisys T27 emulation sends a negative acknowledgement of a select received from the host.

Fast Select enabled

Factory default: Selected

Selecting this option will cause the Unisys T27 emulation to accept fast select, group select, and broadcast select messages while not in receive ready mode.

Monitor mode enabled

Factory default: Unselected

When enabled, line activity is monitored and messages being transmitted to and from stations on the data communications line to which you are connected are displayed.

Pass through printing enabled

Factory default: Unselected

Enables or disables pass through printing.

Return key in forms exits field

Factory default: Unselected

This determines the effect of the Return key in forms mode. When unselected, it moves to the next line.

6-62