Setup Menus
Block TransmissionThis dialog box is displayed by selecting Block Transmission in the Settings menu. The options in this dialog box only apply to the block mode functionality supported by the DEC 'VT' terminal emulations. The block mode settings that are supported by other terminal emulations are specified in their respective dialog boxes.
Send Unprotected Only
Factory default: Unselected
The setting of this option determines whether protected characters can be sent to the host or not.
When unselected, both protected and unprotected characters will be sent to the host when the Enter key is pressed. When selected, only unprotected characters will be sent to the host when the Enter key is pressed.
Send Only Selected Areas
Factory default: Unselected
The setting of this option determines whether all characters or only those in selected areas on the current page are sent to the host when the Enter key is pressed.
When unselected, all characters on the current page will be sent when the Enter key is pressed. When selected, this option will enable only the characters in selected areas to be sent to the host when the Enter key is pressed. The setting of the Send All Selected Areas option determines which selected areas are sent.